Article
PID Tuning Certification and Primary Process Control
Duration: 2 Days Classroom or 15 hours Online
Audience: DCS Technicians, Plant Operators, Instrument Engineers, Process
Engineers and Process Control Engineers.
Prerequisites: Control room experience as technician, operator or engineer is desirable,
but not required.
Course Material: Software Products used in Course – Pitops, Simcet and Training Slides.
Course Description
This course addresses needs of control room operators, DCS technicians, process control engineers, applications engineers and anyone else responsible for PID tuning in the plant. Many new personnel enter the control room these days; there are numerous types of processes and different DCS and PLC systems.
This course starts with the basics of process control, explains the PID equation in the time domain and then trains using three powerful PID tuning, real-time simulation/ optimization and grading software
products.
In a remarkably short 2-day time, students learn to optimally tune PIDs and make process changes on distillation columns, reactors, tanks, compressors, flow controllers, heat exchangers using modern realtime simulator software.
The software also has automatic grading capability, so at end of the course, the software generates a report card on the PID tuning skills of each attendee. This course provides good foundation, skills and knowledge for all DCS/PLC related tag building, control scheme design in a DCS/PLC and the ability to calculate tuning parameters not only for PIDs but other control schemes without the old trial-and-error method but scientifically.
Request More Information
Learning Outcomes
After completing the course, attendees will be able to tune PIDs in any DCS/PLC, troubleshoot problems,
dampen/eliminate oscillations, improve controller performance, all of which helps maximize rates,
directly increasing the plant’s bottom-line profits.
Through practice on a real-time PID tuning simulator, attendees will gain tremendous confidence in PID
tuning on live DCS/PLC’s in actual operating plants. This confidence that would otherwise have taken
several years on the job now can be achieved in just two days. Attendees will also learn many important
and practical concepts about DCS/PLC operations.
Day 1:
Introduction to Industrial Process Control
Process Control Terminology and Definitions
Manipulated Variables, Controlled Variables, Disturbance/Feedforward Variables
Process Control Dynamics and Process Transfer Functions
Open Loop Dynamics
PID Equation in Time Domain and Laplace Domain
PiControl Solutions LLC – Industrial Training Courses Page 2
PID Examples in Time Domain with Calculation Illustrations
Process Control Schematics
Positional and Velocity Forms of PID Equation
PID Simulations using Pitops and Simcet
Advanced Forms of PID Algorithms
Simulating Noise and Process Disturbances
Filter Action and Filter Time Constant
Estimating Correct Filter Time Constant in DCS or PLC
Hands-On Lab (Practical) Sessions Using Real-Time PID Simulator Software
Day 2:
Optimal Tuning Theory and Calculations
Error Criteria for PID Tuning and Quantifying Control Quality
Typical PID Tuning Parameters for Various Types of Processes
Optimal Tuning using Pitops Simulator with Disturbances, Noise and Setpoint Changes
Estimating Process Dynamics from DCS Trends and Operator Knowledge
Transforming Process Operating Information into Controller Tuning
DCS Attributes and Features
Controller Modes
PV Tracking
Importance of Derivative Action, When to Use/Not to Use Derivative
Estimating Derivative Tuning Parameter Scientifically
Procedures for conducting Step Tests in the Plant
Continue Hands-On Lab (Practical) Sessions Using Simulator Software
Cascade Control Basics
SP/OP Tracking, Bumpless Transfer
Timed Tests using Training Simulator for Testing
Optimal Tuning Theory and Calculations
Error Criteria for PID Tuning and Quantifying Control Quality
Typical PID Tuning Parameters for Various Types of Processes
Optimal Tuning using Pitops Simulator with Disturbances, Noise and Setpoint Changes
Estimating Process Dynamics from DCS Trends and Operator Knowledge
Transforming Process Operating Information into Controller Tuning
DCS Attributes and Features
Controller Modes
PV Tracking
Importance of Derivative Action, When to Use/Not to Use Derivative
Estimating Derivative Tuning Parameter Scientifically
Procedures for conducting Step Tests in the Plant
Continue Hands-On Lab (Practical) Sessions Using Simulator Software
Cascade Control Basics
SP/OP Tracking, Bumpless Transfer
Timed Tests using Training Simulator for Testing